Screening Plant - Feeder/Conveyor/Picking Station/Eddy Current


DescriptionVideoBrochure

The CEC system pictured has a variable speed open throat feeder that allows maximum control of the in-feed product. This system is built for C & D material recovery. It will handle from 150 to 300 tons per hour depending on the C & D mixture.

The open throat feed allows controlled feed and stratification of the product. It leaves the feeder and goes up a 40’ x 48” wide, fully skirt boarded conveyor to the screen plant. This conveyor can be equipped with two air lift systems for paper removal.

The screen is a skid mounted 5x12 or 6x16 Two Deck Screen depending on tonnage.

The top deck of the screen will be equipped with punch plate or finger deck. The finger deck will allow the best separation.

The second deck will have 1” or 1 ½” screen cloth to allow the fines and small ferrous metals to exit. The under screen conveyor feeds the 30” x 40’ take away conveyor. This conveyor is equipped with a magnetic head pulley, aluminum discharge chute and drops the ferrous metal into a movable tote bin.

Both screen deck over products feed onto the picking table conveyor.

The picking conveyor is 48” wide, fully skirted, has safety guards - full length, walk ways, kick plates, hand rails and stairways for access.

There are six drop chutes for product removal on each work platform. Removed products drop down by gravity to the under bin totes.

The six pickers can be given two products each to remove. Normal products are carpet, paper, wall board, glass, wood, plastic, rock, concrete, plastic pipe, cast iron, copper and miscellaneous items.

The steel products are removed by the cross belt magnet. This removes ferrous metals.

 

 

We will now have 10 to 15% of the product left. This will be aluminum and fluff. This product drops onto the Eddy Current belt, advances to the Eddy Current head section and Boom! The Eddy Current launches the aluminum to the front of the discharge hood and down the chute to a tote bin on the take away conveyor. The conveyor drops the non-ferrous metal into a take away tote bin.

The fluff drops off the Eddy Current belt, down the first chute off the discharge hood and onto the take away conveyor. The fluff is dropped into its own tote bin.

The Eddy Current system is mounted on a heavy duty stand with walk ways, kick plates, railings and access stairs.

CEC system comes complete with electric switch gear, push button control station, “E” stops and variable feeder speed control.

 On plant, plug and play wiring can be quoted where codes allow. A Complete electrical schematic is provided with material parts list for future service.

The complete plant carries a CEC warranty and field set up assistance.

CEC builds larger and simpler plants. Talk to CEC or its dealer. Let us help you get the best plant for your job.


 


Product Information Request
Company Name:
First Name:
Last Name:
Address:
City:
State:
Zip:
Country:
Phone:
Email:
Subject:
Comment: