450 Series Closed Circuit Plant


CEC 450 Closed Circuit cone plant features a 6x16 (3) Deck Screen, 48” under screen conveyor, hydraulic raise and lower screen for easy set up, 42” screen feed conveyor with 25hp wrap drive, 36” under cone conveyor, Cross over return chute with wear liners, prewired motor to the electrical control box. The electrical panel has a solid state, reduced voltage starter for the 250HP 1200 RPM TEFC motor. The solid state starter automatically cuts over to a bypass contactor after start up. There are starters for all on board motors and any off boards you want. The electrical rides on the plant for transport and sits on the ground, vibration free for operation.

The chassis is fifth wheel pull, tri axle with spring suspension, access ladders, walk ways, kick plates and hand rails.

The screen has 140mm bearing running in oil, eccentric screen shaft for high energy, outside counter weights, rubber spring suspension, two piece discharge lips from the top decks, you unbolt the second half of the lip for live charge. The screen lips have wear liners. The screen is Huck Riveted Construction with fabricated, crowned screen decks.

CEC provides screen drive motor drive enclosure for operator safety.

The chassis comes with six jacking legs for set up and drop down telescoping legs. (not pictured) You can add hydraulic or run on legs to the plant. CEC has built Closed Circuit plants for about 30 years. Our plants are rugged built and take the hard knocks found in the portable crushing industry. We would like your company’s consideration for when you are ready to add a crusher. We have dealers that support you locally with sales, parts and after purchase service.


Product Information Request
Company Name:
First Name:
Last Name: