133 x 115 Closed Circuit Horizontal Impactor with Feeder and Screen


CEC builds a 133 x 115 and 102 x 115 closed circuit impact plant. It can be powered electrically or diesel with a built on board generator.

This is a big plant but it will move easily in most areas. The plant has a 46” x 16’ feeder with six feet of grizzly bars. The impactor is 40” or 53” in diameter and 45” wide. We can also build a 102 x 153 – 40” diameter x 60” wide unit. Absolutely terrific for recycling!

The screen is normally 5’ wide and 14’ long – 2 deck. Option is a 5’ x 16’ 2 deck. The closing conveyor comes from the screen to the re-feed chute. The conveyor is usually free standing but we can build it into the frame for onboard transport. The re-feed chute bolts on to the feed hood, has wear liners and removes for transport.

The plant option is a cross belt magnet stand, cross belt magnet and an aluminum slider bed with UHMW plastic slide bars. The slide bed has a long rubber discharge chute to reach your steel scrap box.

The plant uses CAT diesel power, full hydraulic, self adjusting clutch, Newage generator and self contained electrical switch gear with on board motor wiring included.

The crusher frame is 21” “H” beam construction, has six jacking leg supports and drop down pin connected front legs.

The crusher frame is fitted with a blow bar charging platform, engine access platform, operators raised platform and operator control house. The plant can be equipped with remote radio controls to start – stop and speed control the feeder.

The feeder has an option for a second deck, under grizzly screen deck and reject side conveyor.

This plant is high volume, crushes basalt, limestone and recycles. CEC has sold these plants across the USA and in export. They are excellent producers! The maintenance requirements are normal and the cost per ton is excellent.


Product Information Request
Company Name:
First Name:
Last Name: