Screen-Its

CEC changed the industry when we introduced the Screen-It. Our feed conveyor and hopper are our feeder. We developed a planetary reduction drive to handle the low speed of the feed conveyor and the high torque of the load on the feed belt. Materials discharge forward from the feeder on to the screen. The material doesn’t change directions; it keeps moving forward. Over sized material is screened, cleaned and exits down the top deck chute. Materials smaller than the top deck gets seperated by the screen cloth sizes and out the proper conveyor to the stock pile.

CEC has the best screen stroke in the industry. 45 degree stroke and 5/8 inch rise. This opens up your product so the fines can move through the cloth.

Screen-It bottom screen can have a self cleaning ball deck added to keep your screen cloth from blinding. We are cloth application experts and can keep you screening when your competition is unable to operate.

4×8 2 Deck Screen-it®

CEC Introduces the New Diesel-Powered 4×8 Screen-It® In an age when the scope and overall market trends in the screening business are evolving, CEC is adapting to meet those changes head on. In light of changing market demands, CEC has designed and built the answer—the new CEC 4×8 Diesel Screen-It. The 4×8 Diesel Screen-It is…

Continue reading

View the 4×8 2 Deck Screen-it®

5 x 12 2 Deck Screen It®

CEC’s 5 x 12 (2) deck Screen-It® is our most popular Screen-It®. It has a large open throat feed hopper with an extremely controllable drive system. It can be a grizzly machine, grizzly hopper (straight wall) or a flaired rear hopper that opens where the feed hydraulically rises to work position. The 5 x 12…

Continue reading

View the 5 x 12 2 Deck Screen It®

5 x 12 2 Deck Track Screen-It®

The 5 x 12 track Screen-It® has all the working features of the wheeled Screen-It®. The track Screen-It® adds on site mobility to the equation. Screen and track windrow materials. Move freely around the job site screening products at the material source. No hauling to the Screen-It®. The track mobile comes to you.

View the 5 x 12 2 Deck Track Screen-It®

6 x 16 2 Deck Screen It®

CEC’s 6 x 16 (2) deck Screen-It® is one of our most popular Screen-Its®. It has a large open throat feed hopper with an extremely controllable drive system. It can be a grizzly machine, grizzly hopper (straight wall) or a flaired rear hopper that opens where the feed hydraulically rises to work position. The 6…

Continue reading

View the 6 x 16 2 Deck Screen It®

6 x 16 3 Deck Screen It®

The 6 x 16 (3) deck Screen-It® has all the working features of the two deck plus: • One more sorting screen deck • One more finished product conveyor Now you make: • Fines product • Third deck product • Second deck product • Plus and over-sized product • You can add a top deck…

Continue reading

View the 6 x 16 3 Deck Screen It®

6 x 16 Track Screen-It®

The 6 x 16 track Screen-It® has all the working features of the wheeled Screen-It®. The track Screen-It® adds on sight mobility to the equation. Screen and track windrow materials. Move freely around the job sight screening products at the material source. No hauling to the Screen-It®. The track mobile comes to you.

View the 6 x 16 Track Screen-It®

6 x 20 2 Deck Screen-It®

The 6 x 20 Track Screen-It® is our largest Screen-It®. Its’ production is approximately 30% greater than the 6×16 Screen-It®. It has a CAT water cooler engine, hydraulic front and rear run on legs. Easy access ladders, walkway, kick plates and safety railings. The screen is mounted on rubber mounts, has 5/8″ stroke standard and…

Continue reading

View the 6 x 20 2 Deck Screen-It®

6 x 20 Track Mobile Screen-It®

The 6 x 20 Track Screen-It® is our largest Screen-It®. Its production is approximately 30% greater than the 6 x 16 Screen-It®. It has a CAT water cooled engine, and hydraulic front and rear run on legs. Easy access ladders, walkway, kick plates and safety railings. The screen is mounted on rubber mounts, has 5/8″…

Continue reading

View the 6 x 20 Track Mobile Screen-It®

Jaw Crusher – Cone Crusher – RF Screen-It®

The RF (reverse flow) Screen-It® was developed for cone feed. Set up the RF Screen-It. Angle the cone so the second deck screen conveyor feeds the cone and the cone plant feeds the RF Screen-It®. Drive your jaw so it discharges into the RF screen hopper. Drop your reject conveyor. With screen cloth installed, you…

Continue reading

View the Jaw Crusher – Cone Crusher – RF Screen-It®

Jaw Crusher – Impact Crusher – Screen-It®

The track jaw running with the reverse flow (RF) 6 x 16 screen and the 102 x 152 (60”) wide impactor makes a very high volume crushing plant. All three units are track mounted. Track the jaw forward so the conveyor feeds the RF Screen-It® hopper. You now have a plant that rejects, if needed,…

Continue reading

View the Jaw Crusher – Impact Crusher – Screen-It®

Picking Station with Screen-It®

4, 6, and 8 Station Picking Tables Run with a CEC Screen-It®!

View the Picking Station with Screen-It®

Ash Screening Plant with Screen-It®, Conveyors and Magnets

Shown is a screening plant using a CEC 5 x 12 2 Deck Screen-It®, overs conveyor and magnets producing four products.

View the Ash Screening Plant with Screen-It®, Conveyors and Magnets

C & D Plant – Screen-It to Picking Station and Eddy Current

The CEC C & D processing plant pictured can be fully portable if needed. The Plant starts out with a CEC 6’ x 16’ Screen-It. The Screen-It provides a 48” wide, fully skit boarded variable speed open throat feed system. The products flow onto the screen deck. The CEC 6’ x 16’ Screen has a…

Continue reading

View the C & D Plant – Screen-It to Picking Station and Eddy Current

133 x 115 Impactor with 6 x 16 2D Screen-It®

Pictured is a CEC 133 x 115 Reverse High Discharge Impactor, feeding a 6 x 16 2 Deck Screen-It®. The contractor was making 1 ½ x 0 recycled concrete. The plant runs 2500 to 3000 tons per day production on this job. Both plants have hydraulic run on legs. Set up the screen-it, back the…

Continue reading

View the 133 x 115 Impactor with 6 x 16 2D Screen-It®

Cone-It Screen-It® Combo Unit

The Screen-It® sets up with a Cone-It® and become a closed-circuit gravel plant. The grizzly on the Screen-It® circuits the feed size to the cone. The end conveyor on the Screen-It® feeds the rock to be crushed directly into the cone for crushing. The crushed product comes back out the under crusher conveyor and onto…

Continue reading

View the Cone-It Screen-It® Combo Unit

Crush-It Screen-It® Combo Unit

CEC makes a diesel driven impact crusher which mates with a Screen-It®. The Crush-It® and Screen-It’s® conveyor closes the circuit. Feed the Crush-It’s® vibratory feeder. The material flows to the impactor, gets crushed, out the under conveyor, drops on the side discharge conveyor and into the Screen-It®. Any over-sized product returns to the impactor feed…

Continue reading

View the Crush-It Screen-It® Combo Unit

45″ Track Cone with Screen-It®

The 45″ track cone mates with the 5 x 12 track mobile Screen-It® without any extra conveyors.  Set up time is 15 minutes maximum. You are producing quality screened and crushed product. This combination will reject rock that exceeds six to one reduction ratio.

View the 45″ Track Cone with Screen-It®